MIL-DTL-83133E
作者:标准资料网 时间:2024-05-17 09:23:34 浏览:8030
来源:标准资料网
MIL-DTL-83133E, DETAIL SPECIFICATION: TURBINE FUEL, AVIATION, KEROSENE TYPE, JP-8 (NATO F-34), NATO F-35, and JP-8+100 (NATO F-37) (11 APR 2008) [SUPERSEDING MIL-T-83144D]., This specification covers three grades of kerosene type aviation turbine fuel, JP-8 (NATO F-34), NATO F-35, and JP-8+100 (NATO F-37). This specification was thoroughly reviewed as a part of acquisition reform. While most of the requirements were converted to performance terms, not all requirements could be converted due to the military-unique nature of the product (see 6.1) and the need for compatibility with deployed systems. The issuance of this specification as "detail" is not intended to constrain technology advances in future systems.
【英文标准名称】:Photography(Chemicals)-Pre-PackagedChemicalsfortheProcessingofPhotographicSilverHalideMaterials-Vocabulary
【原文标准名称】:摄影用化学药品.摄影卤化银材料用预封装的化学药品.词汇
【标准号】:ANSIPH4.34-1970
【标准状态】:作废
【国别】:
【发布日期】:
【实施或试行日期】:
【发布单位】:美国国家标准学会(US-ANSI)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:
【英文主题词】:
【摘要】:
【中国标准分类号】:
【国际标准分类号】:
【页数】:
【正文语种】:
【英文标准名称】:Gasweldingequipment-Pressureregulatorsforgascylindersusedinwelding,cuttingandalliedprocessesupto300bar(ISO2503:1998);GermanversionENISO2503:1998
【原文标准名称】:气焊设备.300巴以下的焊接、切割和相关工艺中使用的气体瓶的压力调节器
【标准号】:ENISO2503-1998
【标准状态】:现行
【国别】:
【发布日期】:1998-10
【实施或试行日期】:
【发布单位】:欧洲标准学会(EN)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:压力调节器;乙炔;气体;焊接;合格试验;压力计;储气瓶;压力控制;切削;气焊设备;压力;气焊;焊接工程;结构要求;操作;压缩气体;气体流动;方法;设备安全;阀门;气体所有权;安全;规范(验收);安全要求;液化石油气;性能试验;焊接设备;二氧化碳;作标记;安全工程;试验;定义;试验条件;名称与符号;特性;分类系统;型式;减压器;气压;混合气体;特性;连接
【英文主题词】:Acetylene;Carbondioxide;Characteristics;Classesofapparatus;Classificationsystems;Compressedgas;Connections;Constructionrequirements;Cutting;Definition;Definitions;Designations;Englishlanguage;Equipmentsafety;Frenchlanguage;Gascylinders;Gasflow;Gasmixtures;Gaspressure;Gastype;Gaswelding;Gases;Gas-weldingequipment;Germanlanguage;Liquefiedpetroleumgas;Manufacturing;Marking;Methods;Methylacetylen-propadiene;Operation;Performancetests;Pressure;Pressurecontrol;Pressuregauges;Pressurereducers;Pressureregulators;Processes;Properties;Qualificationtests;Safety;Safetyengineering;Safetyrequirements;Specification(approval);Testing;Testingconditions;Tests;Typetesting;Types;Valves;Welding;Weldingengineering;Weldingequipment
【摘要】:
【中国标准分类号】:J64
【国际标准分类号】:
【页数】:15P.;A4
【正文语种】:英语